Want your interior to stand out after dark? The TYPE S Drive & Glow Blue LED Lighted Steering Wheel Cover adds a soft electric-blue glow right where your hands are, with a textured faux leather grip and a USB rechargeable power pack. Here’s what it does, how to install and charge it, and how to make sure it fits your wheel. It’s available at AutoZone.
What Is a Light-Up Steering Wheel Cover?
A light-up steering wheel cover is a regular slip-on cover with built-in lighting. The TYPE S Drive & Glow uses electroluminescent lighting, which gives a smooth, even blue glow along the rim instead of bright, pinpoint LEDs. It’s designed to accent your interior without a harsh glare.
TYPE S Drive & Glow Blue LED Steering Wheel Cover Features
- Electroluminescent blue lighting – A smooth, even glow that accents your interior without harsh glare.
- 2 light modes – Solid and blink.
- Textured faux leather – A carbon fiber-look texture with blue accents that helps protect your steering wheel from dirt and sun fading.
- USB rechargeable power pack – Mounts discreetly on the back of the steering wheel and can stay connected while you drive. USB-C input, 5V DC.
- Universal slip-on fit – Fits standard 14.5" to 15.5" diameter steering wheels.
- Everything included – Steering wheel cover, rechargeable power pack, mounting case with 3M double-sided tape, and USB charging cable.
Watch the TYPE S Drive & Glow in Action
Will It Fit My Steering Wheel?
The Drive & Glow fits standard steering wheels from 14.5" to 15.5" in diameter. To check yours, measure straight across the steering wheel from the outside edge on one side to the outside edge on the other. If your wheel falls in that range, the cover should fit.
How to Install the LED Steering Wheel Cover
A good steering wheel cover is supposed to fit snugly, so take your time. Follow the steps in the box:
- Pull out the power plug – Pull the power plug out of the steering wheel cover’s core so it’s free before you start.
- Start at the top – Slide the cover over the top of your steering wheel.
- Work it down in small sections – Work the cover down each side of the wheel a little at a time, rather than pulling hard at one spot.
- Mount the power pack – Find a flat surface on the back of the steering wheel and clean it with rubbing alcohol (not included). Attach the power pack mount with the included 3M tape.
Installation Tips
- Don’t yank the cover. Stretching too hard in one place can strain the lighting inside. Work around the wheel evenly.
- Warm it up first. A cover that’s been sitting in a warm car is more flexible and easier to slide on.
- Clean before you stick. Wipe the mounting spot with rubbing alcohol, let it dry, and press the mount firmly in place so the tape bonds well.
- Keep the cable clear. Route the power cable so it won’t snag on your hands or the steering column when you turn the wheel.
How to Turn It On and Charge It
- Connect the power cable to the power pack.
- Press and hold the button to turn on the blue glow.
- Press again for Blink Mode, and press again to turn it off.
- To charge, disconnect the power pack, slide it out of the mount, and connect it to a USB power source with the included charging cable.
- When it’s fully charged, all four indicator lights turn off. Disconnect it and slide it back into the mount.
Tip: Fully charge the power pack before your first drive. Use solid mode (or turn the light off) while driving, and save Blink Mode for when you’re parked.
More Than Just Lights: Grip and Protection
Even with the lights off, the Drive & Glow is a full steering wheel cover. The textured faux leather gives you a comfortable grip and helps protect your original wheel from dirt, wear, and sun fading.
Prefer Pink?
The Drive & Glow also comes in pink. Read Add a Pop of Pink with the TYPE S LED Steering Wheel Cover.
Complete the Look
Pair your glowing wheel with more TYPE S interior lighting:
- LED Seat Covers: Light Up Your Car Interior with TYPE S Plug & Glow
- LED Floor Mats for Cars: Rubber vs. Carpet
Where to Buy
Find the TYPE S Drive & Glow Blue LED Lighted Steering Wheel Cover (Part # SW534692-6) on AutoZone.com or at an AutoZone store near you.
LED Steering Wheel Cover FAQ
What size steering wheel does it fit?
Standard steering wheels from 14.5" to 15.5" in diameter.
Does it plug into my car?
No. It runs on a USB rechargeable power pack that mounts on the back of the steering wheel and can stay connected while you drive.
How do I charge it?
Slide the power pack out of its mount and connect it to a USB power source with the included cable. When all four indicator lights turn off, it’s fully charged.
What light modes does it have?
Two: solid and blink. Press and hold the button to turn it on, press again for blink, and press again to turn it off.
Is a light-up steering wheel cover distracting?
The electroluminescent glow is designed to be soft and even, without harsh glare. If any interior light bothers you at night, switch it off. Laws on interior lighting can vary, so check your local rules.
Does it protect my steering wheel?
Yes. The faux leather cover helps protect your original wheel from dirt and sun fading.
Conclusion
The TYPE S Drive & Glow Blue LED Steering Wheel Cover gives your interior a cool blue glow, a comfortable textured grip, and protection for your wheel, all powered by a rechargeable battery with no wiring into your car. Pick one up at AutoZone and light up your next night drive.









Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.