TYPE S HyperBright™ 24" LED Lighting Kit
Add some character to your ride with the HyperBright™ 24" LED Lighting Kit from TYPE S, featuring two 12” HyperBright™ LED light strips and multiple power options for custom lighting experience.
With cut marks located on each LED strip, you can customize the fit for each application.
Included in each kit are 12V power adapter and hardwire options for you to choose the best power source.
Enjoy an up to 80%* brighter lighting experience in your vehicle with HyperBright™ technology.
Trim-to-fit LED strips are water-resistant and backed with 3M VHB adhesive tape for secure mounting.
Easily bend and connect up to 12 feet of HyperBright™ LED strips on 1 power source.
Built-in short circuit protection technology ensures a safe installation and operation when connected to your 12V power source.
Add some character to your ride with the HyperBright™ 24" LED Lighting Kit from TYPE S, featuring two 12” HyperBright™ LED light strips and multiple power options for custom lighting experience.
With cut marks located on each LED strip, you can customize the fit for each application.
Included in each kit are 12V power adapter and hardwire options for you to choose the best power source.
Enjoy an up to 80%* brighter lighting experience in your vehicle with HyperBright™ technology.
Trim-to-fit LED strips are water-resistant and backed with 3M VHB adhesive tape for secure mounting.
Easily bend and connect up to 12 feet of HyperBright™ LED strips on 1 power source.
Built-in short circuit protection technology ensures a safe installation and operation when connected to your 12V power source.
FAQ
What is operation voltage?
DC 12V only.
What are HyperBright LED kits?
HyperBright LEDs are up to 80% brighter than non-HyperBright LED strips.
How do the LEDs stick?
The LED strips are backed with 3M VHB (very high bond) adhesive strips.
Choose your desired location
Clean surface thoroughly with isopropyl alcohol.
Peel off the 3M™ tape backer and carefully apply to the desired location
Are the LEDs waterproof?
The LED strips are IP65 water-resistant. Car washes, rain, or snow will not harm the strips. Please do not fully submerse into water.
What type of LED do I use?
5050 SMD RGB - Surface mounted diode.
How are the LEDs powered?
The LED strips are powered with the included 12V cigarette lighter adapter (CLA), or included 12V hardwire cable for the fuse box, a fuse adapter is not included.
What are LEDs?
L-E-D stands for light-emitting diode. The diodes are highly efficient and produce bright light with minimal heat.
Are these LED Strips DOT approved?
We recommend to check local and state laws when using LED products in a moving vehicle.
Can I cut the LED strips?
Yes, you may cut the LED strips at the pre-definded locations on the LED strips. Look for the scissor icon, it is safe to cut here. The trimmed piece will not be able to be extended in the future. The piece that was cut off is no longer functional and can be discarded.
How do you install the LED strips?
We recommend to thoroughly clean the surface area of the vehicle with rubbing alcohol prior to installation. It's imperative to make sure that greasy substances are completely removed. Allow the rubbing alcohol to completely dry / evaporate before attaching the adhesive strips to the vehicle. For optimal adhesion, we also recommend to install the LED strips in a cool environment.
Can this kit be used on the exterior of the car, is it weatherproof?
This kit is intended for interior use only.
Is this kit expandable?
Yes, there are Plug & Glow Extensions available.
How come the light is not working?
It can be poor power connection. Please check the power connection and try to reconnect power.
Product specification
The TYPE S 24" HyperBright™ LED Kit takes brightness to another level by outshining standard kits by 80%. Our vehicle lighting kits come with flexible, water-resistant, adhesive-backed LED strips. Designed with first-to-market, 4-pin Plug & Glow connection points, this TYPE S LED kit can extend up to 12 feet when using HyperBright™ extension strips (sold separately). Power the LED strips with the included the 12V power adapter, or 12V hardwire cable to the fuse box; fuse adapter not included.
24 in (2 x 12 in) / 61 cm (2 x 30 cm)
12 VDC System Only
White: 5050 White
Blue: 5050 Blue
Red: 5050 Red
Multicolor: 5050 RGB
12 ft (Total Combined)
3A
Multicolor:
LM55322-60/6 (UPC 643334553226)
LM55322-1 (UPC 643334553226)
Blue:
LM54794-60/6 (UPC 643334547942)
LM54794-1 (UPC 643334547942)
Red:
LM54795-60/6 (UPC 643334547959)
LM54795-1 (UPC 643334547959)
White:
LM54796-60/6 (UPC 643334547966)
LM54796-1 (UPC 643334547966)
In the Box
- 2 x 12" HyperBright™ LED Strips
- 12V Power Adapter
- 2 x 12V Hardwire Cables
- Installation Instruction