TYPE S 96" LED Interior Lighting Kit
Code copied!
Add some character to your ride with the Instant Plug & Glow™ 96" LED Lighting Kit from TYPE S, featuring two 12” and two 36" LED light strips, four 48" extension wires, and multiple power options for an easy and customizable lighting experience.
With cut marks located on each LED strip, you can customize the fit for each application.
Included in each kit are 12V power adapter and hardwire options for you to choose the best power source.
Trim-to-fit LED strips are water-resistant and backed with 3M VHB adhesive tape for secure mounting.
Easily bend and connect up to 12 feet of Instant Plug & Glow™ LED strips on 1 power source.
Built-in short circuit protection technology ensures a safe installation and operation when connected to your 12V power source.
Add some character to your ride with the Instant Plug & Glow™ 96" LED Lighting Kit from TYPE S, featuring two 12” and two 36" LED light strips, four 48" extension wires, and multiple power options for an easy and customizable lighting experience.
With cut marks located on each LED strip, you can customize the fit for each application.
Included in each kit are 12V power adapter and hardwire options for you to choose the best power source.
Trim-to-fit LED strips are water-resistant and backed with 3M VHB adhesive tape for secure mounting.
Easily bend and connect up to 12 feet of Instant Plug & Glow™ LED strips on 1 power source.
Built-in short circuit protection technology ensures a safe installation and operation when connected to your 12V power source.
FAQ
What is operation voltage?
DC 12V only.
How do the LEDs stick?
The LED strips are backed with 3M VHB (very high bond) adhesive strips.
Choose your desired location.
Clean surface thoroughly with isopropyl alcohol.
Peel off the 3M™ tape backer and carefully apply to the desired location.
Are the LEDs waterproof?
The LED strips are IP65 water-resistant. Car washes, rain, or snow will not harm the strips. Please do not fully submerse into water.
What type of LEDs do you use?
5050 SMD RGB - Surface mounted diode.
How are the LEDs powered?
The LED strips are powered with the included 12V cigarette lighter adapter (CLA), or included 12V hardwire cable for the fuse box, a fuse adapter is not included.
What are LEDs?
L-E-D stands for light-emitting diode. The diodes are highly efficient and produce bright light with minimal heat.
Are these LED Strips DOT approved?
We recommend to check local and state laws when using LED products in a moving vehicle.
Can I cut the LED strips?
Yes, you may cut the LED strips at the pre-definded locations on the LED strips. Look for the scissor icon, it is safe to cut here. The trimmed piece will not be able to be extended in the future. The piece that was cut off is no longer functional and can be discarded.
How do you install the LED strips?
We recommend to thoroughly clean the surface area of the vehicle with rubbing alcohol prior to installation. It's imperative to make sure that greasy substances are completely removed. Allow the rubbing alcohol to completely dry / evaporate before attaching the adhesive strips to the vehicle. For optimal adhesion, we also recommend to install the LED strips in a cool environment.
Can this kit be used on the exterior of the car, is it weatherproof?
This kit is intended for interior use only.
Is this kit expandable?
Yes, there are Plug & Glow Extensions available.
How come the light is not working?
It can be poor power connection. Please check the power connection and try to reconnect power.
In the Box
- 2 x 12" LED Strip
- 2 x 36" LED Strip
- 4 x 48" Extension Cable
- 1 x 12V Power Adapter
- 2 x 12V Hardwire Cable