Wireless Solar-Powered HD Backup Camera Gen. 1


The Solar Powered HD Quick-Connect Wireless Backup Cam with 5" Monitor is fully-loaded and incredibly simple to install. A simple hand wave gesture turns on the monitor when you are ready to reverse. Our plug and use camera system is a no-brainer upgrade that enhances driver safety and eases the stress of parallel parking.



*Firmware Update*

Please CLICK HERE for step-by-step firmware update instructions. This update will improve the pairing stability between your camera and monitor.

*MacOS users please contact Customer Support.

  • Simple Wireless Installation
    Easy to mount on your license plate, plug and use

    Hand Gesture Activated Monitor
    Activate the HD camera by waving your hand or pressing the Power button

    Solar Rechargeable
    Never needs charging again with 2 hours of sunlight exposure per day

    Weatherproof Camera
    Durable for use in the roughest weather conditions

  • Frequency 2.4GHz
    Operating Voltage Monitor DC 12V / 24V, Backup Camera DC 5V
    Operation Temperature +14°F ~ +122°F / -10°C ~ +50°C
    Maximum Signal Range 30 feet / 10 meters (without Interference or Obstruction)
    Weather Resistance IP65 rating (Camera Only)
    Battery Capacity 2200mAh
    Package Includes:
    - Solar Powered Quick-Connect Wireless Backup Cam
    - 5” Hand Gesture Activated Monitor
    - Magnetic Windshield Mount
    - USB Charging Cable
    - 12V/ 24V Power Adapter
    - Installation kit
    - Quick Install Guide
    - Instruction Manual
  • 30 Feet / 10 meters
    If your monitor disconnects from your camera after successful pairing, the voltage from your car is likely unstable. Please follow the Firmware Update instructions to upgrade your monitor’s firmware.
    Fully charge overnight with provided MicroUSB charging cable. Once charged, press and hold the button below the camera on the license plate frame for 2-seconds to Power On the device. Then press and hold the same button for 5-7 seconds to enter Pairing Mode. The Blue LED will flash, then go to your monitor Menu Setting > Pair Camera. Watch our How to Pair video HERE.
    The camera was designed to enhance safety for cars that do not have integrated backup camera systems.
    This camera will work with trucks, however, some pickup trucks might require a special installation method to fit above the rear bumper. Please refer to the Instruction Manual.
    This camera may work with a trailer; however, it depends on what you are hauling: ATV / UTVs, a boat, tractor, etc. There could be interference if the haul is large or dense. The wireless Flex Mount Backup Camera with 5” Monitor may be a better option of you are hauling cargo on a regular basis because it will be wired in to stable power source.
    2.4 GHz wireless technology.
    By default, the monitor goes to sleep after 45-seconds of inactivity. This Operation Time can be adjusted in the monitor’s Settings. Please refer to the Instruction Manual.
    The monitor has motion detection sensors. The sensitivity can be adjusted in the monitor’s Motion Detection Settings. Please refer to the Instruction Manual.

Related Items