Spot, flood, or combo? It’s the first question when you shop for an LED light bar or pod lights, and the answer changes how well you see at night. Here’s what each beam pattern does, where it works best, and which TYPE S Elevate lights fit each job.
Spot vs Flood: The Short Answer
- Spot beam – A narrow, focused beam that reaches far down the road or trail. Best for higher speeds and seeing what’s coming.
- Flood beam – A wide, even spread of light close to the vehicle. Best for slow trails, campsites, work areas, and lighting up the sides.
- Combo beam – A spot section and a flood section in one light, so you get distance and width together. Best if you only want one light bar.
What Is a Spot Beam?
A spot beam concentrates its light into a tight pattern. You get more distance but less side coverage. Spot lights are a good choice for open roads, desert running, and any time you need to see far ahead.
Try the TYPE S Elevate 6" Spot Beam Accent Light Bar Set (2,400 total raw lumens, with an amber DOT clearance mode) or the Elevate 4" Amber Spot Round Pod Light Set.
What Is a Flood Beam?
A flood beam spreads its light wide and close. It won’t reach as far as a spot, but it lights up the area right around you, including the edges of the trail. Flood lights are ideal for slow, technical trails, camp, backing up, and work lights for a truck bed.
Try the Elevate 4" x 3" Flood Beam Pod Light Set, the Elevate 5" Flood Beam Pod Light, or the Elevate 6" x 4" Flood Beam Work Light.
What Is a Combo Beam Light Bar?
A combo beam light bar combines both patterns. The center usually throws a spot beam for distance, while the outer sections flood the sides. If you want a single light bar that does a bit of everything, a combo is the safest choice.
TYPE S Elevate combo lights include:
- Elevate 20" Spot + Flood Combo Light Bar with Amber Accent – 10,400 raw lumens.
- Elevate 32" Spot + Flood Combo Slim Light Bar with Amber Accent – 11,020 raw lumens, with a low-profile, single-row design to minimize wind noise.
- Elevate 6.5" Spot + Flood Combo Light Bar Set – 10,800 total raw lumens (5,400 per light).
- Elevate 3" Spot + Flood Combo Cube Pod Light Set – 4,000 total raw lumens, harness included.
- Elevate 6" Spot + Flood Combo Pod Light – 4,050 raw lumens per light.
Spot vs Flood vs Combo: Comparison
| Beam | Pattern | Best For | TYPE S Elevate Example |
|---|---|---|---|
| Spot | Narrow, long reach | Open roads, desert, higher speeds | 6" Spot Accent Light Bar Set |
| Flood | Wide, close coverage | Slow trails, camp, work lights, truck beds | 4" x 3" Flood Pod Set, 6" x 4" Flood Work Light |
| Combo | Spot center with flood sides | All-around use with one light | 20" and 32" Combo Light Bars |
How to Combine Beam Patterns
Many builds use more than one beam pattern:
- Combo bar up front – A 20" or 32" combo bar on the bumper or roof for all-around light.
- Flood ditch lights – Flood or combo pods at the A-pillars to light the sides of the trail. See where to mount ditch lights.
- Spot pods for distance – A pair of spot pods on the bumper to add reach.
- Flood work lights out back – Flood lights on the rear or over the truck bed for backing up and loading.
To control all of them from one place, use the TYPE S Elevate LYNX 6 Switch Panel. Read more in our LYNX 6 switch panel guide.
On-Road Modes Built In
Most off-road light bars are for off-road use only. TYPE S Elevate lights add on-road modes: an SAE J581 auxiliary mode with a beam pattern and brightness designed for on-road use, plus DOT modes such as clearance, parking, or identification lights, depending on the light. They’re DOT/SAE compliant when installed in pairs as directed. Off-Road mode is for off-road use only. Learn more in Are Off-Road Lights Street Legal?
Watch: How to Install the TYPE S Elevate 32" Combo Light Bar
Watch: How to Install the TYPE S Elevate 6" x 4" Flood Work Light
Spot vs Flood FAQ
Is spot or flood better for a light bar?
If you only want one light bar, a combo beam gives you both. Choose spot for long-distance visibility at speed, and flood for wide, close-up light on slow trails.
Should ditch lights be spot or flood?
Most people choose flood or combo ditch lights, because their job is to light the sides of the trail. Spot ditch lights reach farther but cover less area.
What are the best work lights for a truck bed?
Flood lights, because they spread light evenly over a wide, close area. The TYPE S Elevate 6" x 4" Flood Work Light delivers 2,475 raw lumens.
Are TYPE S Elevate lights waterproof?
The Elevate light bars and pod lights in this guide have die-cast aluminum housings and an IP67 dust and waterproof rating.
Conclusion
Pick a spot beam for distance, a flood beam for width, and a combo beam for both. With on-road DOT/SAE modes, IP67 die-cast housings, and LYNX 6 compatibility, TYPE S Elevate lights make it easy to build the setup you need.







Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.