DOT

Are Off-Road Lights Street Legal? DOT, SAE J581 and How TYPE S Elevate Lights Comply

Off-road trucks at night with TYPE S Elevate light bars, pod lights and amber DOT accent lights on

Can you use off-road lights on the street? For most light bars and pod lights, the answer is no: they’re labeled “for off-road use only.” But some lights are built with on-road modes that meet DOT and SAE standards. Here’s what those labels mean, what the laws generally say, and how TYPE S Elevate lights are designed to work on the trail and on the road.

TYPE S Elevate round pod lights lit on a roof rack at sunset

This article is general information, not legal advice. Lighting laws vary by state, so check the rules where you live and drive.


Are Off-Road Lights Street Legal?

Most off-road lights aren’t street legal when they’re turned on. Bright light bars and pods can blind oncoming drivers, and most states limit how many auxiliary lights you can use, where they’re mounted, and when they can be on. Many states allow you to have off-road lights on your vehicle as long as they’re off (and in some states covered) on public roads.

For example, California Vehicle Code 24402 allows no more than two auxiliary driving lamps on the front of a vehicle, mounted 16 to 42 inches high, and says driving lamps supplement the high beams and may not be lit with the low beams. Other states have their own rules.


What Do DOT and SAE Mean on Lights?

  • DOT – The U.S. Department of Transportation. Vehicle lighting in the U.S. is regulated under federal motor vehicle safety standards, and “DOT compliant” means a light is designed to meet those requirements for its function.
  • SAE – SAE International publishes lighting standards. SAE J581 covers auxiliary high beam lamps, also called driving lamps, which supplement your high beams.

A light can be compliant for one function, like a clearance light, and still have another mode that’s for off-road use only.


How TYPE S Elevate Lights Handle On-Road and Off-Road Use

TYPE S Elevate lights have separate wires for separate modes, usually 3–4 wires per light. Depending on the light, the modes include:

  • SAE J581 auxiliary mode – A beam angle, pattern, and brightness designed for on-road use.
  • DOT clearance light mode – Amber LEDs meant to be mounted at the highest practical height to show your vehicle’s size.
  • DOT identification light mode – An amber accent on the 20" and 32" light bars, compliant when installed with a pod light on either side.
  • DOT parking light mode – A low-intensity white light so other drivers can see your vehicle parked on the roadside.
  • Off-Road mode – Maximum brightness for trails and off-road use only.

On the Elevate 20" light bar, for example, the wires are: black = neutral, red = Off-Road mode (maximum brightness), blue = SAE J581 auxiliary mode, and white = DOT mode. Always check the instructions for your specific light.

TYPE S Elevate light wire colors: black neutral, red off-road mode, blue SAE J581 auxiliary mode, white DOT mode

Elevate lights are DOT/SAE compliant when installed in pairs according to the instructions and regulations. Lights sold individually, like the 5" Flood Pod Light, need a second light for compliance.


TYPE S Elevate On-Road Modes by Light

Light On-Road Modes Off-Road Raw Lumens
20" Combo Light Bar SAE J581 auxiliary, DOT identification 10,400
32" Combo Slim Light Bar SAE J581 auxiliary, DOT identification 11,020
6.5" Combo Light Bar Set SAE J581 auxiliary, DOT parking 10,800 (set)
3" Combo Cube Pod Set SAE J581 auxiliary, DOT clearance 4,000 (set)
3.5" Spot Round Pod Set SAE J581 auxiliary, DOT clearance 4,360 (set)
4" Flood Cube with Amber Accent SAE J581 auxiliary, DOT parking, clearance, identification 2,660
4" Amber Spot Round Pod Set DOT clearance, identification 4,220 (set)
6" x 4" Flood Work Light SAE J581 auxiliary, DOT parking 2,475

See each Walmart listing for full details and installation requirements.


Tips for Using Auxiliary Lights on the Road

  • Use the right mode – On public roads, use only the DOT or SAE modes, and only as your state allows.
  • Treat driving lights like high beams – Turn them off for oncoming traffic and when following other vehicles.
  • Never use Off-Road mode or strobe on public roads.
  • Mount and aim them correctly – Follow the instructions for mounting height, pairs, and aim.
  • Cover them if required – Some states require covers on off-road lights when you’re on the road.
  • Put each mode on its own switch – The LYNX 6 Switch Panel lets you give each mode its own button so you always know which one is on.

Off-Road Lights Legal FAQ

Can you use off-road lights on the street?

Generally, not in off-road mode. Some lights, like TYPE S Elevate, have SAE and DOT modes designed for on-road use when installed as directed. Check your state’s laws.

Are light bars legal in California?

California limits auxiliary driving lamps to two on the front, mounted 16 to 42 inches high, and they may not be lit with the low beams. Check the full vehicle code and local rules before using any auxiliary light on the road.

What does SAE J581 mean?

It’s the SAE standard for auxiliary high beam lamps, also called driving lamps.

Do I need to install TYPE S Elevate lights in pairs?

Yes, for DOT/SAE compliance. Some modes have extra requirements, like mounting height or pod lights on either side of a light bar.


Conclusion

Most off-road lights are for off-road use only, but TYPE S Elevate lights give you on-road SAE and DOT modes plus a full-power Off-Road mode in the same light. Install them in pairs, use the right mode for where you’re driving, and check your local laws. Shop TYPE S Elevate lighting at Walmart.


Related Reading

Reading next

Level 1, Level 2 and DC fast EV charging shown with TYPE S CHARGEEV chargers and a ChargEV adapter
TYPE S Elevate LED whip light glowing at dusk next to a truck with red TYPE S Elevate rock lights

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.